Bearing Manufacturer In China Leader Since 1995, Roller Bearing Ball Bearing / WXING Bearing 

ShIP to

العربية

NEWS

الصفحة الرئيسية  > INFO CENTER  > NEWS  > 

Why Is The Friction Power Of Crankshaft Bearing Damaged In Internal Combustion Engine?

Why Is The Friction Power Of Crankshaft Bearing Damaged In Internal Combustion Engine?

2021-01-25

According to the specific analysis of the working condition of crankshaft bearing of internal combustion engine, the main reasons for the damage of bearing friction power are as follows:

1. With the decrease of the surface roughness of journal and bearing, the friction power loss of main bearing decreases obviously. When the surface roughness reaches a certain level, the friction power loss basically remains unchanged;Therefore, in order to reduce the friction power loss, the surface roughness level of journal and bearing should be appropriately improved.

2. As the working temperature of lubricating oil increases, the friction power loss of the main bearing decreases, and the decrease range varies greatly with the temperature. However, if the temperature is too high, the viscosity of lubricating oil decreases, and the bearing capacity decreases.Therefore, on the premise of ensuring the bearing capacity, the appropriate increase of temperature is beneficial to reduce the friction power loss.

3. Under the same working condition, the speed of internal combustion engine increases, and the friction power loss of main bearing increases significantly;Therefore, low speed bearings should be selected within a reasonable speed range to reduce the friction power loss.

4. Different clearance of the main bearing has different effects on the power loss of the main bearing. With the increase of clearance, the power loss tends to decrease.Therefore, the situation of too small clearance should be avoided in engineering practice.

5. The change of oil supply advance Angle has an impact on the friction power loss of the main bearing. Within a certain range, the power loss changes relatively close to that of the main bearing; if beyond a certain range, the power loss changes greatly.

6. In the design stage of main bearing of internal combustion engine, bearing surface roughness and bearing clearance should be considered as the main factors affecting friction power loss of main bearing of internal combustion engine under the premise of considering friction power loss.Secondly, within a given speed and temperature range, appropriately reducing the working speed of the main bearing and appropriately increasing the working temperature of the lubricating oil are conducive to reducing the friction power loss of the bearing.


دردشة على الإنترنت 编辑模式下无法使用
دردشة على الإنترنت inputting