Joint bearing is a kind of spherical sliding bearing, the sliding contact surface is an inner spherical surface and an outer sphere, rotary oscillation motion can be in any Angle, it USES the surface phosphating, Fried, padded, spraying and other special craft processing method.Joint bearing with large load capacity, impact resistance, corrosion resistance, wear resistance, from the heart, good lubrication, etc. Joint bearing structure than the rolling bearing is simple, its mainly by a spherical within the inner ring and a spherical outer ring.Joint bearing is generally used in low speed of the swinging motion (that is, the angular motion), due to the sliding surface of spherical shape, can be tilted movement in certain Angle range (that is, the heart movement), the supporting shaft and the shaft shell hole concentricity is bigger, can still work normally. Joint bearing can bear larger load.According to the different types and structure, can bear radial load, axial load or the joint of the radial, axial load.Because the inside is outside the sphere with composite material, so the bearing can produce self-lubrication at work.Oscillating motion is generally used in low speed, and low speed rotation, can also be tilted movement within a certain Angle, when the supporting shaft and shaft shell hole concentricity is bigger, can still work normally.Self-lubricating bearing joints used in water conservancy, professional machinery and other industries.